Parameters: 

– „learning” function – automatic saving of settings without the need to program the controller
– 9 time ranges a day with any temperature
– up to 63 different settings per week
– advance – switching on the heating earlier to reach the set temperature at the desired time
– possibility to choose to work with two sensors (floor temperature limitation)
– intuitive temperature setting with a knob
– blocking the regulator completely or partially with any 4-digit PIN code
– automatic selection of controller operating parameters depending on the elements and type of installation
– memory of all settings and ranges independent of power failure
– switching between heating and cooling with saving settings for both functions
– simultaneous display of temperatures on the screen: current and desired
– automatic or manual stopping of heating during airing the room
– quick test of correct connection of the regulator
– a number of useful functions: automatic changeover to summer and winter time, heating off after the heating season, adjustable anti-freeze temperature

Surface-mounted, wireless (dedicated to the ET6RX module)

The post Elektroninis temperatūros reguliatorius Euroster Q7TXT6 appeared first on HydroLand.

Possibility to choose different programs for each day of the week
Two programs
Two temperatures to choose from-day and night
Six heating periods per day
Easy and intuitive way of programming
Possibility of short-term changes in heating temperature
Easy to assemble
Protection against freezing
Heating adjustment by 0,5⁰C
Multi-functional display
Maintaining all settings in memory, even in the event of a long-term lack of batteries

The post Kambario termostatas DKL LOGIC 100 appeared first on HydroLand.

It controls the actuators mounted on the floor manifold and has the option to turn off the boiler and the circulation pump if all heating circuits are off.

Works with Euroster room regulators and electrothermal actuators 230V normally closed (NC).

The post Grindinio šildymo valdymo modulis Euroster T6 appeared first on HydroLand.

It maintains independent temperatures in individual rooms by means of regulators.

It can work with 6 wireless room regulators and 6 thermoelectric heads and a central heating pump. (Regulators are designed to maintain an appropriate temperature in the room. After exceeding the set temperature, the regulator sends a signal causing the actuator to close. The actuator will be reopened when the temperature drops below the set temperature on the regulator.)

If there are several heating circuits in a given room, it is recommended to connect one

The post Grindinio šildymo valdymo modulis Euroster T6RX appeared first on HydroLand.

Parameters: 

– remembers two temperatures a day
– works in one of three modes: room temperature control mode, floor temperature control mode or room temperature with floor temperature limitation control mode
– designed to control the operation of the pump, central heating boiler or another heating device
– temperature setting with an accuracy of 0,2°C
– signaling the operation of the heating device, signaling the low battery
– the function of switching off the regulator after the heating season
– correction of temperature indications
– test mode that allows checking the correct operation of the regulator

Surface-mounted execution

The post Elektroninis temperatūros reguliatorius Euroster Q1, virštinkinis appeared first on HydroLand.

Parameters: 

– remembers two temperatures a day
– it does not require wiring between the regulator and the controlled device
– an easy-to-use temperature controller that allows easy temperature control in living and utility rooms
– designed to control the operation of the pump, central heating boiler or another heating device
– innovative function of automatic storage of two daily settings
– temperature setting with an accuracy of 0,2°C
– signaling the operation of the heating device
– signaling the low battery

Surface-mounted, wireless version (dedicated to the T6RX module)

The post Elektroninis temperatūros reguliatorius Euroster Q1, virštinkinis, bevielis appeared first on HydroLand.

Working modes: party, vacation, airing, permanent, eco

Parameters: 

– „learning” function – automatic saving of settings without the need to program the controller
– 9 time ranges a day with any temperature
– up to 63 different settings per week
– advance – switching on the heating earlier to reach the set temperature at the desired time
– possibility to choose to work with two sensors (floor temperature limitation)
– intuitive temperature setting with a knob
– blocking the regulator completely or partially with any 4-digit PIN code
– automatic selection of controller operating parameters depending on the elements and type of installation
– memory of all settings and ranges independent of power failure
– switching between heating and cooling with saving settings for both functions
– simultaneous display of temperatures on the screen: current and desired
– automatic or manual stopping of heating during airing the room
– quick test of correct connection of the regulator  
– a number of useful functions: automatic changeover to summer and winter time, heating off after the heating season, adjustable anti-freeze temperature

Surface-mounted execution

The post Elektroninis temperatūros reguliatorius Euroster Q7 appeared first on HydroLand.

The controller has the following functions:

-intuitive temperature setting using the knob
-controlling the operation of the central heating circulation pump or operation of the pump loading the domestic hot water heater or operation of the circulation pump
-possibility of switching on continuous operation
-COMFORT SYSTEM function, protecting the pump against limescale
-installation protection function against freezing and overheating
-signal of temperature sensor damage.

PLUS mode: in the PLUS mode, the controller controls the operation of the pump that loads the domestic hot water heater or the operation of the circulation pump. Switching the pump on and off is done in the opposite way – the pump works when the temperature on the sensor is lower than the set value, and stops working when the temperature rises to the set level.

The post Siurblio temperatūros reguliatorius Hydros 200 appeared first on HydroLand.

Intuitive temperature setting with a knob

Central heating circulation pump operation control

Continuous operation can be switched on

Comfort System function, which protects the pump against limescale

System protection function against freezing and overheating

Signaling of temperature sensor damage

The post Siurblio temperatūros reguliatorius DK 5000 appeared first on HydroLand.

-Maintaining the set temperature of the boiler by controlling the air intake
-The function of supporting the combustion process, the so-called blowing
-Automatic switching off of the control after extinguishing the boiler
-The flap is lowered in the event of a power failure
-Closing the air inlet when adding fuel to the boiler
-Central heating circulation pump control
-COMFORT SYSTEM function, which protects the pump against limescale
-The function of protecting the installation against freezing and overheating of the boiler
-Signal of temperature sensor damage
-Engine lock / failure signaling
-Adjustable display brightness – increased when changing settings
-Possibility to connect the CONTROL remote control panel with an audible alarm function

The post Elektroninis traukos reguliatorius UNISTER appeared first on HydroLand.