Kietojo kuro katilo temperatūros reguliatorius EkoSter 400

Admin — Wed, 05 May 2021 09:41:51 +0000

It is designed to control the boiler blow-in, turn off the circulation pump in heating systems and the domestic hot water heater loading pump (DHW).

Maintaining the set temperature of the boiler by controlling the blow-in

Modulated and set fan power; smooth start

The function of supporting the combustion process, the so-called blowing

Adjustable time of burning off and automatic switching off of the control after burning off the boiler

Stopping the fan operation while feeding fuel to the boiler / shutting down the boiler

Central heating circulation pump operation control

Option to enable or disable hot water priority

Control of the Domestic Hot Water loading pump depending on the required temperature

Possibility to work in the SUMMER mode

COMFORT SYSTEM function, which protects the pump against limescale

The function of protecting the installation against freezing and overheating of the boiler

Signaling of temperature sensors damage

Adjustable display brightness – increased when the settings are changed

Possibility to connect a remote control panel with an audible alarm function

Possibility to connect a room thermostat

Large, clear, alphanumeric LCD display 2 x 16 characters

Technical data	EKOSter 400
Measured temperature range	from – 9 ⁰C to + 120 ⁰C
Temperature setting range for the boiler	from + 40 ⁰C to + 90 ⁰C
Temperature setting range for the Domestic Hot Water heater	from + 40 ⁰C to + 70 ⁰C
Adjustable heating pump activation thereshold	min. 35 ⁰C
Smooth airflow regulation (modulation)	yes
Adjustable minimum fan power	30 % – 70 %
Adjustable maximum fan power	30 % – 100 %
Vent hysteresis (on-off difference)	from 0 ⁰C to 9 ⁰C
Dometic Hot Water pump hysteresis (on-off difference)	from 2 ⁰C to 9 ⁰C
Blow-through adjustment (blow-by turn off completely)	work: 0 – 90 seconds break: 1 – 60 minutes
Adjustable shutdown time of the boiler	0 – 45 minutes
Permissible load of outputs	blowing: 100 W, 230 V central heating pump: 100 W, 230 V domestic hot water: 100 W, 230 V
Rated supply voltage	230 V, 50 Hz
Electric protection	2,5 A
Relative air humidity	< 95%
Casing protection degree	IP 20
Ambient temperature	from 0⁰C to + 40⁰C

REGUL.EKOSTER.400 - HydroLand